Tag Archives: Woodsmith #194

Woodsmith #194 Media Center Part II

Progress on my woodworking project to build a media center has slowed, but is still moving along.

(Also see Part I, or Visit Woodsmith to find Entertainment/Media Center plans in Issue 194).

Both the left and right tower cabinets are assembled and have face frames installed.  I expanded both the height and width of the media center towers so that a larger TV could be accommodated  as well as more space for storage.  The towers are nearly 7′ tall and 24″ wide.

20121117_145350

Lots and lots of sanding.  The maple plywood just requires a light sanding at 220.  The solid maple face frames take a little more time.  I’ve been starting at 120 and working my way up to 220.

Woodsmith #194 Media Center Sawdust

Face frame sawdust.

Here’s the two tower cabinets side-by-side.  Space in the garage is now at a premium.

Woodsmith #194 Media Center

The two tower cabinets side-by-side.

Each of the tower cabinets have two drawers on the bottom.  You can see the drawer slides in the picture above.  Each drawer is approximately 18.5″ wide and 12.5″ deep.  We’ll probably use these drawers for storing BluRay’s and XBox accessories.

The first drawer is almost done, 3 more to go build.

Woodsmith #194 Media Center Dovetail drawers

Media Center Dovetail drawers

I decided to use dovetails since my wife bought me a new Porter-Cable dovetail jig for Christmas.  After spending some time setting up the jig and calibrating my router, I was ready to make some dovetails.  My first two attempts didn’t go so well.  After tweaking the jig a few more times, I finally dialed in the right settings.  It’s a great jig, and I’m anxious to build these drawers and then try it with some other projects.

Woodsmith #194 Media Center Part I

Back in October, I began a new woodworking project to build a media center for the living room.  Currently, my college entertainment center (designed for a 36″ CRT TV) serves as the only storage in the living room, and currently doesn’t do a great job.  It’s time for something better.  After looking around for plans, we finally picked this media center from Woodsmith #194:

Woodsmith #194

The next question…what kind of wood to use.  After seeing similar units in stores such as Pottery Barn and Crate & Barrel, the darker finishes really appealed to us.  Since I have a garage full of walnut, this was my first choice.  I quickly found that walnut plywood was too cost-prohibitive.  Instead, I settled on building this with maple, since I also have a lot of that as well.  I spent some time working on a dark finish:

Testing out various staining and glaze techniques.
Once I found a good dye/glaze combination that achieved the dark finish, it was time to make some sawdust.  I started making the center console.  The plans allowed for a 55″ TV, but knowing me, I wanted to be able to support an even larger TV.  By increasing the width of the center console, this unit should allow us to have a 65″ TV in this media center.
Center cabinet for the TV

Making the center cabinet went by really fast.  It features inset doors, which was a first for me.  It also feels two pull-out drawers for easy access to all of the electronics, and ample space for heat dissipation.   I plan to mount a high-grade power strip and gigabit ethernet switch for all of the components that require ethernet.  In the end, I will also be mounting some LED strip lighting inside the case as well, to make it easy to see inside the cabinet.

The inset doors were easier than I expected.  Mounting the doors with the euro-style hinges was also easier than I thought it would be.  It was also a first for me to use drawer slides for the two component trays.  That part was also easier than expected, and the slides work great.
Once the center unit was complete, I moved on to build the bridge unit that will sit above the center console.  The bridge unit was a fairly easy build.  Simple box construction, face frames, and a top that allows for a crown molding detail.
Bridge Cabinet

Here’s the Center and Bridge console together.

Bridge and Center cabinet together

In the next post, I’ll share some pictures of the two tower cabinets.  I have started to make some progress there as well, and I’m anxious to get both of the tower cabinets complete as well.  I can’t wait to bolt this unit together to see it all as one.